265/80R17.5
265 mm across the tread, a sidewall 80% of that — 212 mm — on a 17.5-inch rim. That puts the whole wheel at 34.2 inches tall.
- Sidewall
- 8.35"
- 212 mm
- Overall
- 34.2"
- 868.5 mm
- Circumference
- 107.4"
- 2.728 m
- Revs per mile
- 590
- per minute at 60 mph
What it needs to sit on
i
Rim widths are the approved range for this section, published by ETRTO and
the Tire and Rim Association. Section width is quoted on one measuring rim;
the 5 mm per half-inch is the industry rule of thumb, not a guarantee.
It mounts on a rim between 7.5" and 9.5" wide, and the tread follows the rim: roughly 5 mm of section width for every half-inch, so about 255 mm across at the narrow end and 275 mm at the wide one. Written the way lift kits and wheel wells are, it is a 34.2×10.4R17.5 — tall by wide, in inches.
Same height, different rim
Bigger rim, same overall height. Sharper steering, harsher ride, and far less rubber between your wheel and the next pothole.
265/70R19.5186 mm sidewall — 13% less
285/65R19.5185 mm sidewall — 13% less
245/75R19.5184 mm sidewall — 13% less
If you fit something taller
A taller tire covers more ground per turn, so the needle reads low and the odometer counts short. Over ten thousand miles on the dial, the last column is what you really drove.
| Fitted instead | Reads 30 | Reads 50 | Reads 70 | Real miles per 10,000 shown |
|---|