125/75R16 vs 145/70R16
Going from one to the other changes the overall height by +2.6 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 125/75R16 | 145/70R16 | Change |
|---|---|---|---|
| Overall height | 23.4" | 24.0" | +2.6 % |
| Sidewall | 3.69" | 4.00" | +8.3 % |
| Section width | 125 mm | 145 mm | +16.0 % |
| Circumference | 73.5" | 75.4" | +2.6 % |
| Revs per mile | 863 | 841 | -2.6 % |
| Axle height | 11.69" | 12.00" | +7.8 mm |
| Approved rim width | 3.5–4.5" | 4–5.5" | overlap 4–4.5" |
Both are approved on a rim 4" to 4.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 125/75R16. Fit 145/70R16 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.8 mph | +0.8 |
| 50 mph | 51.3 mph | +1.3 |
| 70 mph | 71.8 mph | +1.8 |
| 90 mph | 92.3 mph | +2.3 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,261 on the road, so it under-counts by 261. At a true 70 mph the first turns 1006 times a minute, the second 981.