125/80R16 vs 135/70R16
Going from one to the other changes the overall height by -1.8 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 125/80R16 | 135/70R16 | Change |
|---|---|---|---|
| Overall height | 23.9" | 23.4" | -1.8 % |
| Sidewall | 3.94" | 3.72" | -5.5 % |
| Section width | 125 mm | 135 mm | +8.0 % |
| Circumference | 75.0" | 73.6" | -1.8 % |
| Revs per mile | 845 | 860 | +1.8 % |
| Axle height | 11.94" | 11.72" | -5.5 mm |
| Approved rim width | 3.5–4.5" | 3.5–5" | overlap 3.5–4.5" |
Both are approved on a rim 3.5" to 4.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 125/80R16. Fit 135/70R16 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.5 mph | -0.5 |
| 50 mph | 49.1 mph | -0.9 |
| 70 mph | 68.7 mph | -1.3 |
| 90 mph | 88.4 mph | -1.6 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,819 on the road, so it over-counts by 181. At a true 70 mph the first turns 986 times a minute, the second 1004.