135/80R18 vs 125/80R18
Going from one to the other changes the overall height by -2.4 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 135/80R18 | 125/80R18 | Change |
|---|---|---|---|
| Overall height | 26.5" | 25.9" | -2.4 % |
| Sidewall | 4.25" | 3.94" | -7.4 % |
| Section width | 135 mm | 125 mm | -7.4 % |
| Circumference | 83.3" | 81.3" | -2.4 % |
| Revs per mile | 761 | 779 | +2.4 % |
| Axle height | 13.25" | 12.94" | -8.0 mm |
| Approved rim width | 3.5–5" | 3.5–4.5" | overlap 3.5–4.5" |
Both are approved on a rim 3.5" to 4.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 135/80R18. Fit 125/80R18 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.3 mph | -0.7 |
| 50 mph | 48.8 mph | -1.2 |
| 70 mph | 68.3 mph | -1.7 |
| 90 mph | 87.9 mph | -2.1 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,762 on the road, so it over-counts by 238. At a true 70 mph the first turns 888 times a minute, the second 909.