215/40R16 vs 225/35R16
Going from one to the other changes the overall height by -2.5 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 215/40R16 | 225/35R16 | Change |
|---|---|---|---|
| Overall height | 22.8" | 22.2" | -2.5 % |
| Sidewall | 3.39" | 3.10" | -8.4 % |
| Section width | 215 mm | 225 mm | +4.7 % |
| Circumference | 71.5" | 69.7" | -2.5 % |
| Revs per mile | 886 | 908 | +2.5 % |
| Axle height | 11.39" | 11.10" | -7.3 mm |
| Approved rim width | 6–8" | 6–8.5" | overlap 6–8" |
Both are approved on a rim 6" to 8" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 215/40R16. Fit 225/35R16 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.2 mph | -0.8 |
| 50 mph | 48.7 mph | -1.3 |
| 70 mph | 68.2 mph | -1.8 |
| 90 mph | 87.7 mph | -2.3 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,749 on the road, so it over-counts by 251. At a true 70 mph the first turns 1033 times a minute, the second 1060.
What drivers reported
215/40R16 carries 1 complaints. Nobody has filed one naming 225/35R16.