225/40R16 vs 245/35R16
Going from one to the other changes the overall height by -1.4 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 225/40R16 | 245/35R16 | Change |
|---|---|---|---|
| Overall height | 23.1" | 22.8" | -1.4 % |
| Sidewall | 3.54" | 3.38" | -4.7 % |
| Section width | 225 mm | 245 mm | +8.9 % |
| Circumference | 72.5" | 71.5" | -1.4 % |
| Revs per mile | 874 | 886 | +1.4 % |
| Axle height | 11.54" | 11.38" | -4.3 mm |
| Approved rim width | 6–8.5" | 7–9" | overlap 7–8.5" |
Both are approved on a rim 7" to 8.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 225/40R16. Fit 245/35R16 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.6 mph | -0.4 |
| 50 mph | 49.3 mph | -0.7 |
| 70 mph | 69.0 mph | -1.0 |
| 90 mph | 88.7 mph | -1.3 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,855 on the road, so it over-counts by 145. At a true 70 mph the first turns 1019 times a minute, the second 1034.