225/65R20 vs 235/65R20
Going from one to the other changes the overall height by +1.6 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 225/65R20 | 235/65R20 | Change |
|---|---|---|---|
| Overall height | 31.5" | 32.0" | +1.6 % |
| Sidewall | 5.76" | 6.01" | +4.4 % |
| Section width | 225 mm | 235 mm | +4.4 % |
| Circumference | 99.0" | 100.6" | +1.6 % |
| Revs per mile | 640 | 630 | -1.6 % |
| Axle height | 15.76" | 16.01" | +6.5 mm |
| Approved rim width | 6–8.5" | 6.5–8.5" | overlap 6.5–8.5" |
Both are approved on a rim 6.5" to 8.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 225/65R20. Fit 235/65R20 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.5 mph | +0.5 |
| 50 mph | 50.8 mph | +0.8 |
| 70 mph | 71.1 mph | +1.1 |
| 90 mph | 91.5 mph | +1.5 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,162 on the road, so it under-counts by 162. At a true 70 mph the first turns 747 times a minute, the second 735.