225/80R16 vs 235/75R16
Going from one to the other changes the overall height by -1.0 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 225/80R16 | 235/75R16 | Change |
|---|---|---|---|
| Overall height | 30.2" | 29.9" | -1.0 % |
| Sidewall | 7.09" | 6.94" | -2.1 % |
| Section width | 225 mm | 235 mm | +4.4 % |
| Circumference | 94.8" | 93.9" | -1.0 % |
| Revs per mile | 668 | 675 | +1.0 % |
| Axle height | 15.09" | 14.94" | -3.8 mm |
| Approved rim width | 6–8.5" | 6.5–8.5" | overlap 6.5–8.5" |
Both are approved on a rim 6.5" to 8.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 225/80R16. Fit 235/75R16 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.7 mph | -0.3 |
| 50 mph | 49.5 mph | -0.5 |
| 70 mph | 69.3 mph | -0.7 |
| 90 mph | 89.1 mph | -0.9 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,902 on the road, so it over-counts by 98. At a true 70 mph the first turns 780 times a minute, the second 788.