235/40R20 vs 215/40R20
Going from one to the other changes the overall height by -2.3 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 235/40R20 | 215/40R20 | Change |
|---|---|---|---|
| Overall height | 27.4" | 26.8" | -2.3 % |
| Sidewall | 3.70" | 3.39" | -8.5 % |
| Section width | 235 mm | 215 mm | -8.5 % |
| Circumference | 86.1" | 84.1" | -2.3 % |
| Revs per mile | 736 | 753 | +2.3 % |
| Axle height | 13.70" | 13.39" | -8.0 mm |
| Approved rim width | 6.5–8.5" | 6–8" | overlap 6.5–8" |
Both are approved on a rim 6.5" to 8" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 235/40R20. Fit 215/40R20 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.3 mph | -0.7 |
| 50 mph | 48.9 mph | -1.1 |
| 70 mph | 68.4 mph | -1.6 |
| 90 mph | 87.9 mph | -2.1 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,770 on the road, so it over-counts by 230. At a true 70 mph the first turns 859 times a minute, the second 879.