245/40R16 vs 255/35R16
Going from one to the other changes the overall height by -2.9 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 245/40R16 | 255/35R16 | Change |
|---|---|---|---|
| Overall height | 23.7" | 23.0" | -2.9 % |
| Sidewall | 3.86" | 3.51" | -8.9 % |
| Section width | 245 mm | 255 mm | +4.1 % |
| Circumference | 74.5" | 72.3" | -2.9 % |
| Revs per mile | 850 | 876 | +2.9 % |
| Axle height | 11.86" | 11.51" | -8.8 mm |
| Approved rim width | 7–9" | 7–9.5" | overlap 7–9" |
Both are approved on a rim 7" to 9" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 245/40R16. Fit 255/35R16 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.1 mph | -0.9 |
| 50 mph | 48.5 mph | -1.5 |
| 70 mph | 68.0 mph | -2.0 |
| 90 mph | 87.4 mph | -2.6 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,709 on the road, so it over-counts by 291. At a true 70 mph the first turns 992 times a minute, the second 1022.