245/50R22 vs 225/50R22
Going from one to the other changes the overall height by -2.5 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 245/50R22 | 225/50R22 | Change |
|---|---|---|---|
| Overall height | 31.6" | 30.9" | -2.5 % |
| Sidewall | 4.82" | 4.43" | -8.2 % |
| Section width | 245 mm | 225 mm | -8.2 % |
| Circumference | 99.4" | 96.9" | -2.5 % |
| Revs per mile | 637 | 654 | +2.5 % |
| Axle height | 15.82" | 15.43" | -10.0 mm |
| Approved rim width | 7–9" | 6–8.5" | overlap 7–8.5" |
Both are approved on a rim 7" to 8.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 245/50R22. Fit 225/50R22 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.3 mph | -0.7 |
| 50 mph | 48.8 mph | -1.2 |
| 70 mph | 68.3 mph | -1.7 |
| 90 mph | 87.8 mph | -2.2 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,751 on the road, so it over-counts by 249. At a true 70 mph the first turns 744 times a minute, the second 763.