245/60R24 vs 255/60R24
Going from one to the other changes the overall height by +1.3 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 245/60R24 | 255/60R24 | Change |
|---|---|---|---|
| Overall height | 35.6" | 36.0" | +1.3 % |
| Sidewall | 5.79" | 6.02" | +4.1 % |
| Section width | 245 mm | 255 mm | +4.1 % |
| Circumference | 111.8" | 113.2" | +1.3 % |
| Revs per mile | 567 | 559 | -1.3 % |
| Axle height | 17.79" | 18.02" | +6.0 mm |
| Approved rim width | 7–9" | 7–9.5" | overlap 7–9" |
Both are approved on a rim 7" to 9" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 245/60R24. Fit 255/60R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.4 mph | +0.4 |
| 50 mph | 50.7 mph | +0.7 |
| 70 mph | 70.9 mph | +0.9 |
| 90 mph | 91.2 mph | +1.2 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,133 on the road, so it under-counts by 133. At a true 70 mph the first turns 661 times a minute, the second 653.