245/65R22.5 vs 255/60R22.5
Going from one to the other changes the overall height by -1.4 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 245/65R22.5 | 255/60R22.5 | Change |
|---|---|---|---|
| Overall height | 35.0" | 34.5" | -1.4 % |
| Sidewall | 6.27" | 6.02" | -3.9 % |
| Section width | 245 mm | 255 mm | +4.1 % |
| Circumference | 110.1" | 108.5" | -1.4 % |
| Revs per mile | 576 | 584 | +1.4 % |
| Axle height | 17.52" | 17.27" | -6.3 mm |
| Approved rim width | 7–9" | 7–9.5" | overlap 7–9" |
Both are approved on a rim 7" to 9" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 245/65R22.5. Fit 255/60R22.5 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.6 mph | -0.4 |
| 50 mph | 49.3 mph | -0.7 |
| 70 mph | 69.0 mph | -1.0 |
| 90 mph | 88.7 mph | -1.3 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,860 on the road, so it over-counts by 140. At a true 70 mph the first turns 672 times a minute, the second 681.