245/80R18 vs 255/75R18
Going from one to the other changes the overall height by -1.1 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 245/80R18 | 255/75R18 | Change |
|---|---|---|---|
| Overall height | 33.4" | 33.1" | -1.1 % |
| Sidewall | 7.72" | 7.53" | -2.4 % |
| Section width | 245 mm | 255 mm | +4.1 % |
| Circumference | 105.0" | 103.9" | -1.1 % |
| Revs per mile | 603 | 610 | +1.1 % |
| Axle height | 16.72" | 16.53" | -4.8 mm |
| Approved rim width | 7–9" | 7–9.5" | overlap 7–9" |
Both are approved on a rim 7" to 9" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 245/80R18. Fit 255/75R18 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.7 mph | -0.3 |
| 50 mph | 49.4 mph | -0.6 |
| 70 mph | 69.2 mph | -0.8 |
| 90 mph | 89.0 mph | -1.0 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,888 on the road, so it over-counts by 112. At a true 70 mph the first turns 704 times a minute, the second 712.