255/30R20 vs 265/30R20
Going from one to the other changes the overall height by +0.9 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 255/30R20 | 265/30R20 | Change |
|---|---|---|---|
| Overall height | 26.0" | 26.3" | +0.9 % |
| Sidewall | 3.01" | 3.13" | +3.9 % |
| Section width | 255 mm | 265 mm | +3.9 % |
| Circumference | 81.8" | 82.5" | +0.9 % |
| Revs per mile | 775 | 768 | -0.9 % |
| Axle height | 13.01" | 13.13" | +3.0 mm |
| Approved rim width | 7–9.5" | 7.5–9.5" | overlap 7.5–9.5" |
Both are approved on a rim 7.5" to 9.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 255/30R20. Fit 265/30R20 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.3 mph | +0.3 |
| 50 mph | 50.5 mph | +0.5 |
| 70 mph | 70.6 mph | +0.6 |
| 90 mph | 90.8 mph | +0.8 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,091 on the road, so it under-counts by 91. At a true 70 mph the first turns 904 times a minute, the second 896.