255/35R16 vs 275/30R16
Going from one to the other changes the overall height by -2.3 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 255/35R16 | 275/30R16 | Change |
|---|---|---|---|
| Overall height | 23.0" | 22.5" | -2.3 % |
| Sidewall | 3.51" | 3.25" | -7.6 % |
| Section width | 255 mm | 275 mm | +7.8 % |
| Circumference | 72.3" | 70.7" | -2.3 % |
| Revs per mile | 876 | 897 | +2.3 % |
| Axle height | 11.51" | 11.25" | -6.8 mm |
| Approved rim width | 7–9.5" | 7.5–10" | overlap 7.5–9.5" |
Both are approved on a rim 7.5" to 9.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 255/35R16. Fit 275/30R16 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.3 mph | -0.7 |
| 50 mph | 48.8 mph | -1.2 |
| 70 mph | 68.4 mph | -1.6 |
| 90 mph | 87.9 mph | -2.1 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,769 on the road, so it over-counts by 231. At a true 70 mph the first turns 1022 times a minute, the second 1046.