255/35R22 vs 275/30R22
Going from one to the other changes the overall height by -1.8 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 255/35R22 | 275/30R22 | Change |
|---|---|---|---|
| Overall height | 29.0" | 28.5" | -1.8 % |
| Sidewall | 3.51" | 3.25" | -7.6 % |
| Section width | 255 mm | 275 mm | +7.8 % |
| Circumference | 91.2" | 89.5" | -1.8 % |
| Revs per mile | 695 | 708 | +1.8 % |
| Axle height | 14.51" | 14.25" | -6.8 mm |
| Approved rim width | 7–9.5" | 7.5–10" | overlap 7.5–9.5" |
Both are approved on a rim 7.5" to 9.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 255/35R22. Fit 275/30R22 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.5 mph | -0.5 |
| 50 mph | 49.1 mph | -0.9 |
| 70 mph | 68.7 mph | -1.3 |
| 90 mph | 88.4 mph | -1.6 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,817 on the road, so it over-counts by 183. At a true 70 mph the first turns 811 times a minute, the second 826.