255/35R24 vs 245/40R24
Going from one to the other changes the overall height by +2.2 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 255/35R24 | 245/40R24 | Change |
|---|---|---|---|
| Overall height | 31.0" | 31.7" | +2.2 % |
| Sidewall | 3.51" | 3.86" | +9.8 % |
| Section width | 255 mm | 245 mm | -3.9 % |
| Circumference | 97.5" | 99.6" | +2.2 % |
| Revs per mile | 650 | 636 | -2.2 % |
| Axle height | 15.51" | 15.86" | +8.8 mm |
| Approved rim width | 7–9.5" | 7–9" | overlap 7–9" |
Both are approved on a rim 7" to 9" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 255/35R24. Fit 245/40R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.7 mph | +0.7 |
| 50 mph | 51.1 mph | +1.1 |
| 70 mph | 71.6 mph | +1.6 |
| 90 mph | 92.0 mph | +2.0 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,222 on the road, so it under-counts by 222. At a true 70 mph the first turns 758 times a minute, the second 742.