255/40R16 vs 275/35R16
Going from one to the other changes the overall height by -1.9 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 255/40R16 | 275/35R16 | Change |
|---|---|---|---|
| Overall height | 24.0" | 23.6" | -1.9 % |
| Sidewall | 4.02" | 3.79" | -5.6 % |
| Section width | 255 mm | 275 mm | +7.8 % |
| Circumference | 75.5" | 74.1" | -1.9 % |
| Revs per mile | 839 | 855 | +1.9 % |
| Axle height | 12.02" | 11.79" | -5.8 mm |
| Approved rim width | 7–9.5" | 7.5–10" | overlap 7.5–9.5" |
Both are approved on a rim 7.5" to 9.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 255/40R16. Fit 275/35R16 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.4 mph | -0.6 |
| 50 mph | 49.1 mph | -0.9 |
| 70 mph | 68.7 mph | -1.3 |
| 90 mph | 88.3 mph | -1.7 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,812 on the road, so it over-counts by 188. At a true 70 mph the first turns 979 times a minute, the second 998.