255/40R18 vs 245/40R18
Going from one to the other changes the overall height by -1.2 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 255/40R18 | 245/40R18 | Change |
|---|---|---|---|
| Overall height | 26.0" | 25.7" | -1.2 % |
| Sidewall | 4.02" | 3.86" | -3.9 % |
| Section width | 255 mm | 245 mm | -3.9 % |
| Circumference | 81.8" | 80.8" | -1.2 % |
| Revs per mile | 775 | 784 | +1.2 % |
| Axle height | 13.02" | 12.86" | -4.0 mm |
| Approved rim width | 7–9.5" | 7–9" | overlap 7–9" |
Both are approved on a rim 7" to 9" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 255/40R18. Fit 245/40R18 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.6 mph | -0.4 |
| 50 mph | 49.4 mph | -0.6 |
| 70 mph | 69.2 mph | -0.8 |
| 90 mph | 88.9 mph | -1.1 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,879 on the road, so it over-counts by 121. At a true 70 mph the first turns 904 times a minute, the second 915.