255/40R23 vs 265/40R23
Going from one to the other changes the overall height by +1.0 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 255/40R23 | 265/40R23 | Change |
|---|---|---|---|
| Overall height | 31.0" | 31.3" | +1.0 % |
| Sidewall | 4.02" | 4.17" | +3.9 % |
| Section width | 255 mm | 265 mm | +3.9 % |
| Circumference | 97.5" | 98.5" | +1.0 % |
| Revs per mile | 650 | 643 | -1.0 % |
| Axle height | 15.52" | 15.67" | +4.0 mm |
| Approved rim width | 7–9.5" | 7.5–9.5" | overlap 7.5–9.5" |
Both are approved on a rim 7.5" to 9.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 255/40R23. Fit 265/40R23 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.3 mph | +0.3 |
| 50 mph | 50.5 mph | +0.5 |
| 70 mph | 70.7 mph | +0.7 |
| 90 mph | 90.9 mph | +0.9 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,101 on the road, so it under-counts by 101. At a true 70 mph the first turns 758 times a minute, the second 751.