255/45R16 vs 275/40R16
Going from one to the other changes the overall height by -1.5 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 255/45R16 | 275/40R16 | Change |
|---|---|---|---|
| Overall height | 25.0" | 24.7" | -1.5 % |
| Sidewall | 4.52" | 4.33" | -4.1 % |
| Section width | 255 mm | 275 mm | +7.8 % |
| Circumference | 78.7" | 77.5" | -1.5 % |
| Revs per mile | 806 | 818 | +1.5 % |
| Axle height | 12.52" | 12.33" | -4.8 mm |
| Approved rim width | 7–9.5" | 7.5–10" | overlap 7.5–9.5" |
Both are approved on a rim 7.5" to 9.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 255/45R16. Fit 275/40R16 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.6 mph | -0.4 |
| 50 mph | 49.3 mph | -0.7 |
| 70 mph | 69.0 mph | -1.0 |
| 90 mph | 88.7 mph | -1.3 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,851 on the road, so it over-counts by 149. At a true 70 mph the first turns 940 times a minute, the second 954.