255/50R22 vs 235/50R22
Going from one to the other changes the overall height by -2.5 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 255/50R22 | 235/50R22 | Change |
|---|---|---|---|
| Overall height | 32.0" | 31.3" | -2.5 % |
| Sidewall | 5.02" | 4.63" | -7.8 % |
| Section width | 255 mm | 235 mm | -7.8 % |
| Circumference | 100.7" | 98.2" | -2.5 % |
| Revs per mile | 629 | 645 | +2.5 % |
| Axle height | 16.02" | 15.63" | -10.0 mm |
| Approved rim width | 7–9.5" | 6.5–8.5" | overlap 7–8.5" |
Both are approved on a rim 7" to 8.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 255/50R22. Fit 235/50R22 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.3 mph | -0.7 |
| 50 mph | 48.8 mph | -1.2 |
| 70 mph | 68.3 mph | -1.7 |
| 90 mph | 87.8 mph | -2.2 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,754 on the road, so it over-counts by 246. At a true 70 mph the first turns 734 times a minute, the second 753.