255/55R24 vs 255/60R24
Going from one to the other changes the overall height by +2.9 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 255/55R24 | 255/60R24 | Change |
|---|---|---|---|
| Overall height | 35.0" | 36.0" | +2.9 % |
| Sidewall | 5.52" | 6.02" | +9.1 % |
| Section width | 255 mm | 255 mm | 0.0 % |
| Circumference | 110.1" | 113.2" | +2.9 % |
| Revs per mile | 576 | 559 | -2.9 % |
| Axle height | 17.52" | 18.02" | +12.8 mm |
| Approved rim width | 7–9.5" | 7–9.5" | overlap 7–9.5" |
Both are approved on a rim 7" to 9.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 255/55R24. Fit 255/60R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.9 mph | +0.9 |
| 50 mph | 51.4 mph | +1.4 |
| 70 mph | 72.0 mph | +2.0 |
| 90 mph | 92.6 mph | +2.6 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,286 on the road, so it under-counts by 286. At a true 70 mph the first turns 671 times a minute, the second 653.