255/55R24 vs 265/50R24
Going from one to the other changes the overall height by -1.7 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 255/55R24 | 265/50R24 | Change |
|---|---|---|---|
| Overall height | 35.0" | 34.4" | -1.7 % |
| Sidewall | 5.52" | 5.22" | -5.5 % |
| Section width | 255 mm | 265 mm | +3.9 % |
| Circumference | 110.1" | 108.2" | -1.7 % |
| Revs per mile | 576 | 586 | +1.7 % |
| Axle height | 17.52" | 17.22" | -7.8 mm |
| Approved rim width | 7–9.5" | 7.5–9.5" | overlap 7.5–9.5" |
Both are approved on a rim 7.5" to 9.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 255/55R24. Fit 265/50R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.5 mph | -0.5 |
| 50 mph | 49.1 mph | -0.9 |
| 70 mph | 68.8 mph | -1.2 |
| 90 mph | 88.4 mph | -1.6 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,826 on the road, so it over-counts by 174. At a true 70 mph the first turns 671 times a minute, the second 683.