255/60R24 vs 265/60R24
Going from one to the other changes the overall height by +1.3 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 255/60R24 | 265/60R24 | Change |
|---|---|---|---|
| Overall height | 36.0" | 36.5" | +1.3 % |
| Sidewall | 6.02" | 6.26" | +3.9 % |
| Section width | 255 mm | 265 mm | +3.9 % |
| Circumference | 113.2" | 114.7" | +1.3 % |
| Revs per mile | 559 | 552 | -1.3 % |
| Axle height | 18.02" | 18.26" | +6.0 mm |
| Approved rim width | 7–9.5" | 7.5–9.5" | overlap 7.5–9.5" |
Both are approved on a rim 7.5" to 9.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 255/60R24. Fit 265/60R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.4 mph | +0.4 |
| 50 mph | 50.7 mph | +0.7 |
| 70 mph | 70.9 mph | +0.9 |
| 90 mph | 91.2 mph | +1.2 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,131 on the road, so it under-counts by 131. At a true 70 mph the first turns 653 times a minute, the second 644.