255/65R24 vs 275/60R24
Going from one to the other changes the overall height by -0.2 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 255/65R24 | 275/60R24 | Change |
|---|---|---|---|
| Overall height | 37.1" | 37.0" | -0.2 % |
| Sidewall | 6.53" | 6.50" | -0.5 % |
| Section width | 255 mm | 275 mm | +7.8 % |
| Circumference | 116.4" | 116.2" | -0.2 % |
| Revs per mile | 544 | 545 | +0.2 % |
| Axle height | 18.53" | 18.50" | -0.8 mm |
| Approved rim width | 7–9.5" | 7.5–10" | overlap 7.5–9.5" |
Both are approved on a rim 7.5" to 9.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 255/65R24. Fit 275/60R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.0 mph | -0.0 |
| 50 mph | 49.9 mph | -0.1 |
| 70 mph | 69.9 mph | -0.1 |
| 90 mph | 89.9 mph | -0.1 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,984 on the road, so it over-counts by 16. At a true 70 mph the first turns 635 times a minute, the second 636.