265/35R19 vs 285/30R19
Going from one to the other changes the overall height by -2.2 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 265/35R19 | 285/30R19 | Change |
|---|---|---|---|
| Overall height | 26.3" | 25.7" | -2.2 % |
| Sidewall | 3.65" | 3.37" | -7.8 % |
| Section width | 265 mm | 285 mm | +7.5 % |
| Circumference | 82.6" | 80.8" | -2.2 % |
| Revs per mile | 767 | 784 | +2.2 % |
| Axle height | 13.15" | 12.87" | -7.3 mm |
| Approved rim width | 7.5–9.5" | 8–10.5" | overlap 8–9.5" |
Both are approved on a rim 8" to 9.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 265/35R19. Fit 285/30R19 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.3 mph | -0.7 |
| 50 mph | 48.9 mph | -1.1 |
| 70 mph | 68.5 mph | -1.5 |
| 90 mph | 88.0 mph | -2.0 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,783 on the road, so it over-counts by 217. At a true 70 mph the first turns 895 times a minute, the second 914.