265/35R24 vs 275/30R24
Going from one to the other changes the overall height by -2.6 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 265/35R24 | 275/30R24 | Change |
|---|---|---|---|
| Overall height | 31.3" | 30.5" | -2.6 % |
| Sidewall | 3.65" | 3.25" | -11.1 % |
| Section width | 265 mm | 275 mm | +3.8 % |
| Circumference | 98.3" | 95.8" | -2.6 % |
| Revs per mile | 644 | 661 | +2.6 % |
| Axle height | 15.65" | 15.25" | -10.3 mm |
| Approved rim width | 7.5–9.5" | 7.5–10" | overlap 7.5–9.5" |
Both are approved on a rim 7.5" to 9.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 265/35R24. Fit 275/30R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.2 mph | -0.8 |
| 50 mph | 48.7 mph | -1.3 |
| 70 mph | 68.2 mph | -1.8 |
| 90 mph | 87.7 mph | -2.3 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,742 on the road, so it over-counts by 258. At a true 70 mph the first turns 752 times a minute, the second 772.