265/40R19 vs 285/35R19
Going from one to the other changes the overall height by -1.8 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 265/40R19 | 285/35R19 | Change |
|---|---|---|---|
| Overall height | 27.3" | 26.9" | -1.8 % |
| Sidewall | 4.17" | 3.93" | -5.9 % |
| Section width | 265 mm | 285 mm | +7.5 % |
| Circumference | 85.9" | 84.4" | -1.8 % |
| Revs per mile | 738 | 751 | +1.8 % |
| Axle height | 13.67" | 13.43" | -6.3 mm |
| Approved rim width | 7.5–9.5" | 8–10.5" | overlap 8–9.5" |
Both are approved on a rim 8" to 9.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 265/40R19. Fit 285/35R19 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.5 mph | -0.5 |
| 50 mph | 49.1 mph | -0.9 |
| 70 mph | 68.7 mph | -1.3 |
| 90 mph | 88.4 mph | -1.6 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,820 on the road, so it over-counts by 180. At a true 70 mph the first turns 860 times a minute, the second 876.