265/40R22 vs 285/40R22
Going from one to the other changes the overall height by +2.1 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 265/40R22 | 285/40R22 | Change |
|---|---|---|---|
| Overall height | 30.3" | 31.0" | +2.1 % |
| Sidewall | 4.17" | 4.49" | +7.5 % |
| Section width | 265 mm | 285 mm | +7.5 % |
| Circumference | 95.3" | 97.3" | +2.1 % |
| Revs per mile | 665 | 651 | -2.1 % |
| Axle height | 15.17" | 15.49" | +8.0 mm |
| Approved rim width | 7.5–9.5" | 8–10.5" | overlap 8–9.5" |
Both are approved on a rim 8" to 9.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 265/40R22. Fit 285/40R22 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.6 mph | +0.6 |
| 50 mph | 51.0 mph | +1.0 |
| 70 mph | 71.5 mph | +1.5 |
| 90 mph | 91.9 mph | +1.9 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,208 on the road, so it under-counts by 208. At a true 70 mph the first turns 775 times a minute, the second 760.