265/50R23 vs 285/50R23
Going from one to the other changes the overall height by +2.4 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 265/50R23 | 285/50R23 | Change |
|---|---|---|---|
| Overall height | 33.4" | 34.2" | +2.4 % |
| Sidewall | 5.22" | 5.61" | +7.5 % |
| Section width | 265 mm | 285 mm | +7.5 % |
| Circumference | 105.0" | 107.5" | +2.4 % |
| Revs per mile | 603 | 589 | -2.4 % |
| Axle height | 16.72" | 17.11" | +10.0 mm |
| Approved rim width | 7.5–9.5" | 8–10.5" | overlap 8–9.5" |
Both are approved on a rim 8" to 9.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 265/50R23. Fit 285/50R23 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.7 mph | +0.7 |
| 50 mph | 51.2 mph | +1.2 |
| 70 mph | 71.6 mph | +1.6 |
| 90 mph | 92.1 mph | +2.1 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,236 on the road, so it under-counts by 236. At a true 70 mph the first turns 704 times a minute, the second 688.