265/50R24 vs 285/45R24
Going from one to the other changes the overall height by -1.0 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 265/50R24 | 285/45R24 | Change |
|---|---|---|---|
| Overall height | 34.4" | 34.1" | -1.0 % |
| Sidewall | 5.22" | 5.05" | -3.2 % |
| Section width | 265 mm | 285 mm | +7.5 % |
| Circumference | 108.2" | 107.1" | -1.0 % |
| Revs per mile | 586 | 591 | +1.0 % |
| Axle height | 17.22" | 17.05" | -4.3 mm |
| Approved rim width | 7.5–9.5" | 8–10.5" | overlap 8–9.5" |
Both are approved on a rim 8" to 9.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 265/50R24. Fit 285/45R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.7 mph | -0.3 |
| 50 mph | 49.5 mph | -0.5 |
| 70 mph | 69.3 mph | -0.7 |
| 90 mph | 89.1 mph | -0.9 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,903 on the road, so it over-counts by 97. At a true 70 mph the first turns 683 times a minute, the second 690.