265/55R20 vs 285/55R20
Going from one to the other changes the overall height by +2.8 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 265/55R20 | 285/55R20 | Change |
|---|---|---|---|
| Overall height | 31.5" | 32.3" | +2.8 % |
| Sidewall | 5.74" | 6.17" | +7.5 % |
| Section width | 265 mm | 285 mm | +7.5 % |
| Circumference | 98.9" | 101.6" | +2.8 % |
| Revs per mile | 641 | 624 | -2.8 % |
| Axle height | 15.74" | 16.17" | +11.0 mm |
| Approved rim width | 7.5–9.5" | 8–10.5" | overlap 8–9.5" |
Both are approved on a rim 8" to 9.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 265/55R20. Fit 285/55R20 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.8 mph | +0.8 |
| 50 mph | 51.4 mph | +1.4 |
| 70 mph | 71.9 mph | +1.9 |
| 90 mph | 92.5 mph | +2.5 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,275 on the road, so it under-counts by 275. At a true 70 mph the first turns 748 times a minute, the second 728.