265/60R24 vs 285/55R24
Going from one to the other changes the overall height by -0.5 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 265/60R24 | 285/55R24 | Change |
|---|---|---|---|
| Overall height | 36.5" | 36.3" | -0.5 % |
| Sidewall | 6.26" | 6.17" | -1.4 % |
| Section width | 265 mm | 285 mm | +7.5 % |
| Circumference | 114.7" | 114.2" | -0.5 % |
| Revs per mile | 552 | 555 | +0.5 % |
| Axle height | 18.26" | 18.17" | -2.3 mm |
| Approved rim width | 7.5–9.5" | 8–10.5" | overlap 8–9.5" |
Both are approved on a rim 8" to 9.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 265/60R24. Fit 285/55R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.9 mph | -0.1 |
| 50 mph | 49.8 mph | -0.2 |
| 70 mph | 69.7 mph | -0.3 |
| 90 mph | 89.6 mph | -0.4 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,951 on the road, so it over-counts by 49. At a true 70 mph the first turns 644 times a minute, the second 647.