275/30R16 vs 285/30R16
Going from one to the other changes the overall height by +1.1 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 275/30R16 | 285/30R16 | Change |
|---|---|---|---|
| Overall height | 22.5" | 22.7" | +1.1 % |
| Sidewall | 3.25" | 3.37" | +3.6 % |
| Section width | 275 mm | 285 mm | +3.6 % |
| Circumference | 70.7" | 71.4" | +1.1 % |
| Revs per mile | 897 | 887 | -1.1 % |
| Axle height | 11.25" | 11.37" | +3.0 mm |
| Approved rim width | 7.5–10" | 8–10.5" | overlap 8–10" |
Both are approved on a rim 8" to 10" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 275/30R16. Fit 285/30R16 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.3 mph | +0.3 |
| 50 mph | 50.5 mph | +0.5 |
| 70 mph | 70.7 mph | +0.7 |
| 90 mph | 90.9 mph | +0.9 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,105 on the road, so it under-counts by 105. At a true 70 mph the first turns 1046 times a minute, the second 1035.