275/35R24 vs 285/35R24
Going from one to the other changes the overall height by +0.9 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 275/35R24 | 285/35R24 | Change |
|---|---|---|---|
| Overall height | 31.6" | 31.9" | +0.9 % |
| Sidewall | 3.79" | 3.93" | +3.6 % |
| Section width | 275 mm | 285 mm | +3.6 % |
| Circumference | 99.2" | 100.1" | +0.9 % |
| Revs per mile | 639 | 633 | -0.9 % |
| Axle height | 15.79" | 15.93" | +3.5 mm |
| Approved rim width | 7.5–10" | 8–10.5" | overlap 8–10" |
Both are approved on a rim 8" to 10" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 275/35R24. Fit 285/35R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.3 mph | +0.3 |
| 50 mph | 50.4 mph | +0.4 |
| 70 mph | 70.6 mph | +0.6 |
| 90 mph | 90.8 mph | +0.8 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,087 on the road, so it under-counts by 87. At a true 70 mph the first turns 745 times a minute, the second 739.