275/50R19 vs 295/50R19
Going from one to the other changes the overall height by +2.6 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 275/50R19 | 295/50R19 | Change |
|---|---|---|---|
| Overall height | 29.8" | 30.6" | +2.6 % |
| Sidewall | 5.41" | 5.81" | +7.3 % |
| Section width | 275 mm | 295 mm | +7.3 % |
| Circumference | 93.7" | 96.2" | +2.6 % |
| Revs per mile | 676 | 659 | -2.6 % |
| Axle height | 14.91" | 15.31" | +10.0 mm |
| Approved rim width | 7.5–10" | 8.5–11" | overlap 8.5–10" |
Both are approved on a rim 8.5" to 10" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 275/50R19. Fit 295/50R19 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.8 mph | +0.8 |
| 50 mph | 51.3 mph | +1.3 |
| 70 mph | 71.8 mph | +1.8 |
| 90 mph | 92.4 mph | +2.4 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,264 on the road, so it under-counts by 264. At a true 70 mph the first turns 789 times a minute, the second 769.