275/50R24 vs 285/50R24
Going from one to the other changes the overall height by +1.1 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 275/50R24 | 285/50R24 | Change |
|---|---|---|---|
| Overall height | 34.8" | 35.2" | +1.1 % |
| Sidewall | 5.41" | 5.61" | +3.6 % |
| Section width | 275 mm | 285 mm | +3.6 % |
| Circumference | 109.4" | 110.6" | +1.1 % |
| Revs per mile | 579 | 573 | -1.1 % |
| Axle height | 17.41" | 17.61" | +5.0 mm |
| Approved rim width | 7.5–10" | 8–10.5" | overlap 8–10" |
Both are approved on a rim 8" to 10" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 275/50R24. Fit 285/50R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.3 mph | +0.3 |
| 50 mph | 50.6 mph | +0.6 |
| 70 mph | 70.8 mph | +0.8 |
| 90 mph | 91.0 mph | +1.0 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,113 on the road, so it under-counts by 113. At a true 70 mph the first turns 676 times a minute, the second 668.