275/65R22.5 vs 285/60R22.5
Going from one to the other changes the overall height by -1.7 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 275/65R22.5 | 285/60R22.5 | Change |
|---|---|---|---|
| Overall height | 36.6" | 36.0" | -1.7 % |
| Sidewall | 7.04" | 6.73" | -4.3 % |
| Section width | 275 mm | 285 mm | +3.6 % |
| Circumference | 114.9" | 113.0" | -1.7 % |
| Revs per mile | 551 | 561 | +1.7 % |
| Axle height | 18.29" | 17.98" | -7.8 mm |
| Approved rim width | 7.5–10" | 8–10.5" | overlap 8–10" |
Both are approved on a rim 8" to 10" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 275/65R22.5. Fit 285/60R22.5 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.5 mph | -0.5 |
| 50 mph | 49.2 mph | -0.8 |
| 70 mph | 68.8 mph | -1.2 |
| 90 mph | 88.5 mph | -1.5 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,833 on the road, so it over-counts by 167. At a true 70 mph the first turns 643 times a minute, the second 654.