285/35R16 vs 265/35R16
Going from one to the other changes the overall height by -2.3 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 285/35R16 | 265/35R16 | Change |
|---|---|---|---|
| Overall height | 23.9" | 23.3" | -2.3 % |
| Sidewall | 3.93" | 3.65" | -7.0 % |
| Section width | 285 mm | 265 mm | -7.0 % |
| Circumference | 74.9" | 73.2" | -2.3 % |
| Revs per mile | 845 | 865 | +2.3 % |
| Axle height | 11.93" | 11.65" | -7.0 mm |
| Approved rim width | 8–10.5" | 7.5–9.5" | overlap 8–9.5" |
Both are approved on a rim 8" to 9.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 285/35R16. Fit 265/35R16 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.3 mph | -0.7 |
| 50 mph | 48.8 mph | -1.2 |
| 70 mph | 68.4 mph | -1.6 |
| 90 mph | 87.9 mph | -2.1 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,769 on the road, so it over-counts by 231. At a true 70 mph the first turns 986 times a minute, the second 1010.