285/35R18 vs 295/35R18
Going from one to the other changes the overall height by +1.1 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 285/35R18 | 295/35R18 | Change |
|---|---|---|---|
| Overall height | 25.9" | 26.1" | +1.1 % |
| Sidewall | 3.93" | 4.06" | +3.5 % |
| Section width | 285 mm | 295 mm | +3.5 % |
| Circumference | 81.2" | 82.1" | +1.1 % |
| Revs per mile | 780 | 772 | -1.1 % |
| Axle height | 12.93" | 13.06" | +3.5 mm |
| Approved rim width | 8–10.5" | 8.5–11" | overlap 8.5–10.5" |
Both are approved on a rim 8.5" to 10.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 285/35R18. Fit 295/35R18 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.3 mph | +0.3 |
| 50 mph | 50.5 mph | +0.5 |
| 70 mph | 70.7 mph | +0.7 |
| 90 mph | 91.0 mph | +1.0 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,107 on the road, so it under-counts by 107. At a true 70 mph the first turns 910 times a minute, the second 900.