285/35R19 vs 295/35R19
Going from one to the other changes the overall height by +1.0 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 285/35R19 | 295/35R19 | Change |
|---|---|---|---|
| Overall height | 26.9" | 27.1" | +1.0 % |
| Sidewall | 3.93" | 4.06" | +3.5 % |
| Section width | 285 mm | 295 mm | +3.5 % |
| Circumference | 84.4" | 85.2" | +1.0 % |
| Revs per mile | 751 | 743 | -1.0 % |
| Axle height | 13.43" | 13.56" | +3.5 mm |
| Approved rim width | 8–10.5" | 8.5–11" | overlap 8.5–10.5" |
Both are approved on a rim 8.5" to 10.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 285/35R19. Fit 295/35R19 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.3 mph | +0.3 |
| 50 mph | 50.5 mph | +0.5 |
| 70 mph | 70.7 mph | +0.7 |
| 90 mph | 90.9 mph | +0.9 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,103 on the road, so it under-counts by 103. At a true 70 mph the first turns 876 times a minute, the second 867.