285/40R20 vs 295/40R20
Going from one to the other changes the overall height by +1.1 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 285/40R20 | 295/40R20 | Change |
|---|---|---|---|
| Overall height | 29.0" | 29.3" | +1.1 % |
| Sidewall | 4.49" | 4.65" | +3.5 % |
| Section width | 285 mm | 295 mm | +3.5 % |
| Circumference | 91.0" | 92.0" | +1.1 % |
| Revs per mile | 696 | 689 | -1.1 % |
| Axle height | 14.49" | 14.65" | +4.0 mm |
| Approved rim width | 8–10.5" | 8.5–11" | overlap 8.5–10.5" |
Both are approved on a rim 8.5" to 10.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 285/40R20. Fit 295/40R20 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.3 mph | +0.3 |
| 50 mph | 50.5 mph | +0.5 |
| 70 mph | 70.8 mph | +0.8 |
| 90 mph | 91.0 mph | +1.0 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,109 on the road, so it under-counts by 109. At a true 70 mph the first turns 812 times a minute, the second 803.