285/40R22 vs 265/40R22
Going from one to the other changes the overall height by -2.0 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 285/40R22 | 265/40R22 | Change |
|---|---|---|---|
| Overall height | 31.0" | 30.3" | -2.0 % |
| Sidewall | 4.49" | 4.17" | -7.0 % |
| Section width | 285 mm | 265 mm | -7.0 % |
| Circumference | 97.3" | 95.3" | -2.0 % |
| Revs per mile | 651 | 665 | +2.0 % |
| Axle height | 15.49" | 15.17" | -8.0 mm |
| Approved rim width | 8–10.5" | 7.5–9.5" | overlap 8–9.5" |
Both are approved on a rim 8" to 9.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 285/40R22. Fit 265/40R22 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.4 mph | -0.6 |
| 50 mph | 49.0 mph | -1.0 |
| 70 mph | 68.6 mph | -1.4 |
| 90 mph | 88.2 mph | -1.8 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,797 on the road, so it over-counts by 203. At a true 70 mph the first turns 760 times a minute, the second 775.