285/40R24 vs 305/40R24
Going from one to the other changes the overall height by +1.9 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 285/40R24 | 305/40R24 | Change |
|---|---|---|---|
| Overall height | 33.0" | 33.6" | +1.9 % |
| Sidewall | 4.49" | 4.80" | +7.0 % |
| Section width | 285 mm | 305 mm | +7.0 % |
| Circumference | 103.6" | 105.6" | +1.9 % |
| Revs per mile | 612 | 600 | -1.9 % |
| Axle height | 16.49" | 16.80" | +8.0 mm |
| Approved rim width | 8–10.5" | 8.5–11" | overlap 8.5–10.5" |
Both are approved on a rim 8.5" to 10.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 285/40R24. Fit 305/40R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.6 mph | +0.6 |
| 50 mph | 51.0 mph | +1.0 |
| 70 mph | 71.3 mph | +1.3 |
| 90 mph | 91.7 mph | +1.7 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,191 on the road, so it under-counts by 191. At a true 70 mph the first turns 714 times a minute, the second 700.