285/45R16 vs 275/45R16
Going from one to the other changes the overall height by -1.4 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 285/45R16 | 275/45R16 | Change |
|---|---|---|---|
| Overall height | 26.1" | 25.7" | -1.4 % |
| Sidewall | 5.05" | 4.87" | -3.5 % |
| Section width | 285 mm | 275 mm | -3.5 % |
| Circumference | 82.0" | 80.9" | -1.4 % |
| Revs per mile | 773 | 783 | +1.4 % |
| Axle height | 13.05" | 12.87" | -4.5 mm |
| Approved rim width | 8–10.5" | 7.5–10" | overlap 8–10" |
Both are approved on a rim 8" to 10" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 285/45R16. Fit 275/45R16 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.6 mph | -0.4 |
| 50 mph | 49.3 mph | -0.7 |
| 70 mph | 69.0 mph | -1.0 |
| 90 mph | 88.8 mph | -1.2 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,864 on the road, so it over-counts by 136. At a true 70 mph the first turns 902 times a minute, the second 914.