285/45R20 vs 265/45R20
Going from one to the other changes the overall height by -2.4 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 285/45R20 | 265/45R20 | Change |
|---|---|---|---|
| Overall height | 30.1" | 29.4" | -2.4 % |
| Sidewall | 5.05" | 4.69" | -7.0 % |
| Section width | 285 mm | 265 mm | -7.0 % |
| Circumference | 94.6" | 92.3" | -2.4 % |
| Revs per mile | 670 | 686 | +2.4 % |
| Axle height | 15.05" | 14.69" | -9.0 mm |
| Approved rim width | 8–10.5" | 7.5–9.5" | overlap 8–9.5" |
Both are approved on a rim 8" to 9.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 285/45R20. Fit 265/45R20 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.3 mph | -0.7 |
| 50 mph | 48.8 mph | -1.2 |
| 70 mph | 68.4 mph | -1.6 |
| 90 mph | 87.9 mph | -2.1 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,765 on the road, so it over-counts by 235. At a true 70 mph the first turns 782 times a minute, the second 801.