285/45R24 vs 275/50R24
Going from one to the other changes the overall height by +2.1 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 285/45R24 | 275/50R24 | Change |
|---|---|---|---|
| Overall height | 34.1" | 34.8" | +2.1 % |
| Sidewall | 5.05" | 5.41" | +7.2 % |
| Section width | 285 mm | 275 mm | -3.5 % |
| Circumference | 107.1" | 109.4" | +2.1 % |
| Revs per mile | 591 | 579 | -2.1 % |
| Axle height | 17.05" | 17.41" | +9.3 mm |
| Approved rim width | 8–10.5" | 7.5–10" | overlap 8–10" |
Both are approved on a rim 8" to 10" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 285/45R24. Fit 275/50R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.6 mph | +0.6 |
| 50 mph | 51.1 mph | +1.1 |
| 70 mph | 71.5 mph | +1.5 |
| 90 mph | 91.9 mph | +1.9 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,214 on the road, so it under-counts by 214. At a true 70 mph the first turns 690 times a minute, the second 676.