285/45R24 vs 305/40R24
Going from one to the other changes the overall height by -1.4 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 285/45R24 | 305/40R24 | Change |
|---|---|---|---|
| Overall height | 34.1" | 33.6" | -1.4 % |
| Sidewall | 5.05" | 4.80" | -4.9 % |
| Section width | 285 mm | 305 mm | +7.0 % |
| Circumference | 107.1" | 105.6" | -1.4 % |
| Revs per mile | 591 | 600 | +1.4 % |
| Axle height | 17.05" | 16.80" | -6.3 mm |
| Approved rim width | 8–10.5" | 8.5–11" | overlap 8.5–10.5" |
Both are approved on a rim 8.5" to 10.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 285/45R24. Fit 305/40R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.6 mph | -0.4 |
| 50 mph | 49.3 mph | -0.7 |
| 70 mph | 69.0 mph | -1.0 |
| 90 mph | 88.7 mph | -1.3 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,856 on the road, so it over-counts by 144. At a true 70 mph the first turns 690 times a minute, the second 700.